HID Dual Level Switching Controller and PIR Sensor
KEY FEATURES
 • Integrated HID control module and passive infrared occupancy sensor
• Supports 175W to 1,650W CWA-type ballast
• Guaranteed lamp warm-up intelligence
• Continuous lamp monitoring
• Zero Arc Point Switching
• MYzerPORT™ for quick and easy installations
• Short cycle fixture dimming
• Interchangeable PIR lens options
• UL and cUL listed
• Five-year warranty
OVERVIEW
The LightBAT G2 HID Dual Level Switching Controller and PIR sensor is the world’s first digitally integrated HID dual level switching controller and passive infrared (PIR) occupancy sensor. By assembling all the necessary components of an HID dual level switching system into one compact housing. Hubbell Building Automation is able to provide precise area detection and individual fixture control. The LightBAT system switches only those fixtures directly over the activity and maintains full power when necessary. With a shorter dimming interval after vacancy, the LightBAT achieves maximum energy savings by switching the fixture to 50% power when the area becomes unoccupied.
ORDERING INFORMATION
LB1 : LightBAT G2; Supports: 175W Metal Halide / 175W, 200W Pulse Start Metal Halide
LB1EXTP1 : LightBAT G2 with 4 Pin Low Voltage Interface; Supports: 175W Metal Halide / 175W, 200W Pulse Start Metal Halide
LB2 : LightBAT G2; Supports: 250W, 320W, 350W, 400W Metal Halide / 250W, 320W, 350W, 400W, 450W Pulse Start Metal Halide / 250W High Pressure Sodium / 400W High Pressure Sodium (Max. operating temperature @ 55oC
LB2EXTP1 : LightBAT G2 with 4 Pin Low Voltage Interface; Supports: 250W, 320W, 350W, 400W Metal Halide / 250W, 320W, 350W, 400W, 450W Pulse Start Metal Halide / 250W High Pressure Sodium / 400W High Pressure Sodium (Maximum operating temperature @ 55oC.
LB3 : LightBAT G2; Supports: 1,500W, 1,650W Metal Halide (Max. operating temp. @ 55oC) / 1,000W Metal Halide (Max. operating temp. @ 65oC) / 750W, 1,000W Pulse Start Metal Halide (Max. operating temperature @ 55oC / 600W, 1,000W High Pressure Sodium (Max. operating temperature @ 65oC)
LB3EXTP1 : LightBAT G2 with 4 Pin Low Voltage Interface; Supports: 1,500W, 1,650W Metal Halide (Max. operating temp. @ 55oC) / 1,000W Metal Halide (Max. operating temp. @ 65oC) / 750W, 1,000W Pulse Start Metal Halide (Max. operating temperature @ 55oC / 600W, 1,000W High Pressure Sodium (Max. operating temperature @ 65oC)
LBLENS15 : Lens 15, Aisle Lens, 1.5 x .23
LBLENS10 : Lens 10, Aisle Lens, 1.0 x .23
LBLENS07 : Lens 07, Aisle Lens, .70 x .16
LBLENS0806 : Lens 0806, Aisle Lens, .80 x .60
» LightBAT™G2 Cutsheet.pdf
» G2 MH MYzer Port.pdf
» G2 PSMH or HPS MYzer Port.pdf
» G2_EXTP1 with DLC-PCC Daylighting Controls.pdf
» Additional Wiring Diagrams
» LightBAT™G2 Install Instructions.pdf
» LightBAT™G2 Mounting Install Instructions.pdf
|
|
